Cleaning
STEAM NOZZLE
Check and clean the terminals of the steam nozzles, using a small needle to reopen the exit holes.
Clean the inside of the nozzle at least once a week:
• dip the nozzle into a jug of water mixed with a specific cleaner according to the manufacturer's instructions;
• heat the solution with the steam of the nozzle;
• keep the nozzle immersed in the solution for at least 5 minutes so as to allow the cleaner to rise up into the nozzle
as a result the cooling effect;
• repeat the operation 2 or 3 times so that subsequent dispensings don't leave milk residue.
GRINDER-DOSER
Every week clean the bell jar and the dosing device with a cloth soaked in lukewarm water, both inside and out, then
dry it.
• When cleaning, always use cloths that are completely clean and hygienic.
• To guarantee the correct operation and hygiene of the hot beverages dispenser, it is necessary to use the cleaning methods and
i
products suitable for this purpose.
• Do not immerge the machine into water.
• Never use alkaline detergents, solvents, alcohol or aggressive substances.
• The descaling of the machine has to be performed by specialized technicians, by disassembling the components with deposits,
so that no descaling debris is put into circulation. The used products/detergents have to be suitable for this purpose and must not
corrode the materials of the hydraulic circuits.
User manual
Greta
Daily Weekly
X
X
37