Operating The Revolving Console; Heat Retaining Block (Optional); Initial Operation - HASE Lagos Manuel D'utilisation

5.

Operating the Revolving Console

The Lagos has a maximum rotational angle of
90 degrees; you can adjust the rotational angle in
15-degree increments.
Unlock the rotary console by briefl y pressing the
button A and then turn the Lagos to the desired po-
sition. Shortly before the fi nal position is reached,
press the key A again and lock the stove into place
with a slight rotational movement.
fi g. 3
WARNING!
Never turn stove when lighting fi re! In the
whole rotational area range, the safe dis-
tances (radiation area) apply to distances
to fl ammable materials.
38
2. Vorbereitung zur Montage
2.5 Drehwinkel am Aufstellort einstellen
fi g. 4
A
fi g. 5
6.

Heat Retaining Block (optional)

Above the combustion chamber, there are solid stor-
age ashlars made from Magnetite. These store the
heat of the fi re and radiate it slowly once again, pro-
viding prolonged warmth. The storage ashlars mean
that only upward outfl ow is possible.

7 . Initial Operation

NOTE!
During shipment, condensation moisture
can accumulate in the stove's interior,
which may possibly lead to the appear-
ance of condensation or water on the
stove or fl ue pipes. Please dry off these
damp areas immediately.
The surface of your stove was treated in a sand-
blasting machine before applying the colour coating.
Despite careful and thorough inspection, there may
still be some residual material in the stove body,
which can fall out when your stove is being installed.
NOTE!
To prevent any damage, please immedi-
ately vacuum up these small steel pellets
with a vacuum cleaner.
The fi rst time a stove is operated, the heat devel-
opment causes the emission of volatile components
from the coating, sealing strips and lubricants, and
smoke and odours can occur.
At a higher combustion temperature, this one-time
process can take between 4 to 5 hours.