Error Codes; Error Codes / Blinking Lights - Maytag MDB4949SKZ Manuel De L'utilisateur

ERROR CODES / BLINKING LIGHTS

Code Shown
(7 Seg Display)
Issue
(if present)
Dishwasher fails
to operate fill valve
correctly
Motor controller
failure
No water present at
dishwasher
Wash motor failure
Dishwasher
overfills
Fill valve stuck on
Dishwasher will not
drain
Water present
under dishwasher
User interface
service
communication
fault

ERROR CODES

Code Shown on
Front Panel LED *
(# blinks, Pause, #
blinks)
1 Pause 1 Pause -
F1E1
pause, repeat
1 Pause 2 Pause,
F1E2
repeat
8 Pause 1 Pause -
H2O
pause, repeat
7 Pause 2 Pause,
F7E2
repeat
8 Pause 4 Pause -
F8E4
pause, repeat
8 Pause 5 Pause -
F8E5
pause, repeat
9 Pause 1 Pause -
F9E1
pause, repeat
10 Pause 5 Pause -
FAE5
pause, repeat
6 Pause 1 Pause -
F6E1
pause, repeat
What will happen?
Turn off water to unit (if possible).Turn
Drain sequence off power to unit. If the water cannot
will begin, machine be turned off, DO NOT turn off power
operation will be and keep door closed. Press Cancel
prevented key one time to silence alarm tone. Call
service.
Cycle ends Call service
Ensure fill hose is connected to
product. Ensure water supply is turned
Cycle is paused
ON. Press Start to resume cycle. If
alarm still present, call service.
Cycle ends Call service
Turn off water to unit (if possible).Turn
Drain sequence off power to unit. If the water cannot
will begin, machine be turned off, DO NOT turn off power
operation will be and keep door closed. Press Cancel
prevented key one time to silence alarm tone. Call
service.
Turn off water to unit (if possible).Turn
Drain sequence off power to unit. If the water cannot
will begin, machine be turned off, DO NOT turn off power
operation will be and keep door closed. Press Cancel
prevented key one time to silence alarm tone. Call
service.
If drain hose is connected to a garbage
disposal, confirm that drain hose is not
Cycle ends clogged and disposal plug has been
knocked out. If unit still will not drain,
call service.
Cycle ends Call service.
Product will not able to
Call service.
start or resume cycles
What to do?
7