52.
Reinstall access panels
Use a 5/16" nut driver to reinstall the screws through the holes in
the access panels.
IF DISHWASHER DOES NOT OPERATE
First try the solutions suggested here to possibly avoid the cost
of a service call.
Has the circuit breaker tripped or the house fuse blown?
■
Is the door closed tightly and latched?
■
Has the cycle been set correctly to start the dishwasher?
■
Is the water turned on?
■
Is the float switch wire under the product connected to the float
■
switch?
Make sure control lock is not on.
■
If none of these possible solutions work, please see the Quick
Start Guide for service contact information.
28