Cleaning
N
N1 - CLEANING BEFORE USE
•
Correctly assemble all of the components.
•
Close the caps (4c and 4d).
•
Place the containers (2 and 3).
•
Pour 500 ml of clean water in the tray (9).
•
Select "Washing" and then press "Start".
The device will work for almost 10 seconds making the basket (6) rotate in both directions.
•
When the device stops slowly opne the caps (4c y 4d) to empty the separator (4).
•
The device is ready for use.
N2 - CLEANING AFTER USE
Before cleaning, ALWAYS remove the
plug from the mains socket.
•
To clean the motor base (1) use a damp cloth and avoid
abrasive detergents.
Never immerse the motor base (1) in water or other liquids.
Never wash the motor base (1) in the dishwasher.
•
All parts, except the motor base (1), can be washed with warm water and ordinary
detergents for dishes as long as they have a low alkaline content.
It is NOT recommended to wash the parts in a dishwasher.
•
Immediately after each use, use the brush (12) to thoroughly clean the fine mesh holes of
the basket (6). Brush the inside of the basket under running water, holding it up towards
the light to ensure the fine mesh holes are not blocked.
EN
53