21. Press, without forcing, the food in the lid (8) duct to facilitate its pressing.
Never press the food with fingers nor with others tools (spoon, fork,
etc.). Always use the appropriate pusher (10).
22. Juice and pulps are automatically separated; the juice is channelled in the juice collection
container (2) through the spout (4a) while the pulps are channelled in the appropriate
collection container (3).
This operation allows to work a considerable amount of food before its necessary to clean
the device.
23. To avoid spatters, slowly open the anti-dry tap (4a) to let the juice clear.
24. To temporally stop the device during the processing press "Start". Press it again to resume
the processing.
By pressing twice "Power" during functioning, the device starts
the shutdown phase by rotating the basket in reverse direction
for about 10 seconds.
25. At the end of the processing press "R".
26. Close the caps (4c and 4d) before removing the respective containers (2 and 3).
If the device stops during its functioning, press "R" (Reverse) and
make it rotate in reverse to allow the food to be "lifted" by the basket
filter (6).
Press "Start" to resume the processing. If the device doesn't restart
or the rotation is forced, disassemble and clean the components to
avoid to damage them.
EN
47