R.G.V. Juice Art Digital Manuel D'utilisation page 41

"POWER" button - device starts/stops
• After electrically connecting the device and correctly placing the lid (8) on the pulp
separator (4) a buzzer emits an acoustic signal and the switch warning light blinks; the
device is in "standby" mode.
• Press (the warning light turns on steady), the device is ready for use and the
"Hard" menu is set as default (the icon blinks).
• To turn off the device press "Power", the machine turns off after carrying out the basket
support reverse rotation (5) for 5 seconds.
"MENU" button - menu selection
• Press this button to select the desired menu.
At every button pressure a buzzer emits an acoustic signal and the selected icon blinks.
"START" button - working cycle start
• Press this button to start the selected menu.
To temporarily stop the menu in progress , press"Start"; press it again to resume the
processing.
• To start another menu first it's necessary to press the "Power" button, then select the
desired menu and press "Start".
"R" button - "reverse" rotation
• Press this button to start the reverse motor rotation "R"; the basket support (5) rotates
in reverse for 10 seconds.
This button can be used when the device is off or during the execution of a program.
- If all of the icons blink and the buzzer emits a "beep", it means
that the device is in "standby", (status of protection). To restart
the device press one of the buttons.
- The device automatically stops after working constantly for 20
minutes. In this case wait for about 10 minutes for the motor to
cool down before resuming to use the device.
EN
41