R.G.V. Juice Art Digital Manuel D'utilisation page 49

Do not operate with an empty bowl (4) for more than a few
seconds.
Extended use with an empty bowl (4) may damage the unit.
• Prepare the fruit or vegetables to be processed by washing and cutting as necessary then
insert it into the food introduction chute.
• Peel and remove the seeds or cores from the food before processing them.
• Insert the cut fruit and vegetables into the food introduction chute and gently push it
downwards with the food pusher (10).
Do not use fingers or other objects to press down the food, always
use the food pusher (10).
• When using carrots, do not place directly into the food introduction chute but cut them
into pieces and push down with the food pusher (10).
• When processing fruit such as avocado or bananas the result will be closer to a puree
than a fruit juice.
• Roll up fresh vegetables such as spinach, cabbage, lettuce etc. into balls before putting
into the food introduction chute.
• For the best results, make sure that the filter basket (6), the separator (4) and the juice
spout (4a) are not blocked.
• When using very mature fruit, the juice extracted will be quite heavy. In this case, make
sure that the juice density does not block the pouring spout (4a).
Do not process excessively hard or fibrous foods such as rhu-
barb.
Foods as bananas, avocados and similar, due to their pulp
type, aren't suitable for single processing with the juicer.
For food like bananas, avocados and similar is advised the
use with other products to facilitate their leak.
For almond milk (due to its consistency) is advised not to use
great quantities of product (almonds) and to constantly add
water to avoid the device block.
EN
> > > >
49