R.G.V. Juice Art Digital Manuel D'utilisation page 43

K2 - ASSEMBLING
When using for the first time or after a
long period of disuse carefully clean all
the parts (see "Cleaning" section). Rinse
thoroughly and dry the parts before us-
ing them again.
To correctly assemble the appliance:
Remove any label or stickers.
Before you assemble the slow juicer, ensure that the power cord is
unplugged.
1. Place the motor base on a flat, dry and stable surface.
2. In the pulp separator (4) there's a silicone gasket (G).
Make sure that this component (G) is intact and in its appropriate place.
3. Place the separator (4) on the motor base (1) with the graduated scale placed in corre-
spondence with the control panel (1b).
Turn the separator (4) clockwise to block it on the safety switch (11).
4
450ml
350ml
250ml
150ml
1
4
4
1b
EN
G
4
1c
1
1
43