R.G.V. Juice Art Digital Manuel D'utilisation page 36

EN
• Do not install this device; near heater, inflammable material; in
a humid, oily or dusty location, in a location exposed to direct
sunlight and water or where gas may leak; on unlevelled ground.
• Do not spray volatile material such as insecticide onto the surface
of the oven.
• Always pull the plug out of the socket before cleaning the device.
• To avoid overheating, the device stops automatically if it's used
constantly for 20 minutes.
If you must perform machining operations in succession or with
longer times, to perform breaks of at least 5 minutes between cycles
and reducing the time of continuous operation at 10 minutes.
Safety
E
• Do not attempt to repair the device.
Potential injury from misuse!
Avoid contact with all moving parts.
Switch off the device and disconnect from supply before changing
accessories or approaching parts that move in use.
To reduce the risk of injury to persons
F
GROUNDING INSTALLATION
• This device must be grounded. In the event of an electrical short circuit,
grounding reduces the risk of electric shock by providing an escape wire
for the electric current. This device is equipped with a cord having a
grounding wire with a grounding plug. The plug must be plugged into
an outlet that is properly installed and grounded.
Electric Shock Hazard. Improper use of the grounding can result in
electric shock. Do not plug into an outlet until device is properly
installed and grounded.
Do not disassemble this device..
36