Festool OSC 18 Notice D'utilisation D'origine page 14

English
Select the correct depth stop for the tool
and replace if necessary:
Round tools
Cutting blade Rotary depth
12.4 Positioning aid [9+10+11+12]
WARNING
Sharp tools
Pinching and cutting injuries
► Always rest your fingers on the defined
gripping surfaces [11-2].
► Always use the saw blades indicated in Fig.
[11a]. Do not use short saw blades.
WARNING
Risk of accident, electric shock
If the tool comes into contact with live ca­
bles, an electric current may be diverted
through metal components in the tool and
result in electric shock.
► Hold the power tool by the insulated grip­
ping surfaces when performing work that
may pose a risk of cutting into hidden pow­
er cables.
Using the positioning aid
► Mount the adapter [5].
► Attach the positioning aid – [9a] or [9b].
► First place the application tool on the saw
blade guide [10-1], then push it into the
holder [10-2] until it engages. This is nec­
essary to ensure that the application tool is
positioned correctly on the saw blade guide.
► Adjust the cutting depth [11-1].
Always tighten the cutting depth adjust­
ment [11-1].
14
Sliding shoe [8-2]
stop [8-3]
3
2
1
2
3
10-1
1
2
click
10-2
1
9a
9b
10