Ivoclar Vivadent Ceramic Repair N System KIT Mode D'emploi page 5

Then, light-cure for 10 seconds.
(e.g. Bluephase N "High Power Program").
®
7. Applying the opaquer
Apply IPS Empress Direct Opaque to the prepared metal
surface only. The layer applied should have a thickness of
maximum 0.5 mm.
Then, light-cure for 20 seconds.
(e.g. Bluephase N "High Power Program").
If the surface is still not sufficiently masked, apply a
second layer of IPS Empress Direct Opaque and light-cure
again.
8. Restoring the restoration with
Tetric N-Ceram
Apply Tetric N-Ceram in increments of max. 2 mm
and adapt the material with a suitable instrument
(e.g. OptraSculpt Pad).
®
5