Ivoclar Vivadent Ceramic Repair N System KIT Mode D'emploi page 3

Usage
1. Isolation
Appropriate isolation is required, preferably with a rubber
dam (e.g. OptraDam Plus).
®
2. Preparing the metal surface
In case of an exposed metal surface, roughen the surface
with a diamond or corundum grinding instrument using
water irrigation.
Alternatively, roughen the metal surface with an intra-
oral sandblasting device (observe the instructions of the
manufacturer).
3. Preparing the defective ceramic or
composite surface
Bevel the margins of the defective ceramic or composite
surface (1-2 mm) with a fine-grained diamond grinding
instrument using water irrigation.
Subsequently, rinse thoroughly with water and
dry with oil-free air.
3