Note:
If tooth structure is affected by this repair, these
areas must be pretreated with a dentin/enamel
adhesive.
4. Placing the matrix
If the restoration includes proximal areas, place a matrix
band and secure it with a wedge.
5. Monobond N
Use a brush to apply Monobond N to the exposed
ceramic, metal and composite surfaces and allow to react
for 60 seconds.
Subsequently, dry with oil-free air. (Do not rinse with
water.)
6. Applying Heliobond
Apply a thin layer of Heliobond to the entire surface area
which needs to be repaired. Remove any excess with
compressed air.
4