Tyre Demounting - Pax System - CEMB SM628BPS Manuel D'utilisation

6) After fitting has been completed by means of the control lever
bead pressing tool and bring the arm (10, Fig. 8) in non-working position.

6.3 TYRE DEMOUNTING - PAX SYSTEM

6.3.1 Procedure for PAX standard tyres (fig. 20)
- Deflate the tyre.
- Lock the PAX wheel support (C) on the turntable.
- Place the wheel with PAX tyre on the support(C).
- Insert the anti-rotation plug (D) in one of the fixing holes of the rim.
- Select the appropriate cone N or O according to the size of the centring hole.
- Install the quick ring-nut H.
- Clamp the wheel by locking the nut H with the wrench (I).
22
18
90°
D
C
H
I
, lift the
19
H
N
O
20
User's manual