Main Working Elements Of The Machine; Preliminary Checks; Demounting-Mounting - Standard Tyres - CEMB SM628BPS Manuel D'utilisation

6. MAIn WoRKInG eleMenTS of THe
MAcHIne
Do not use The accessory for different uses than that for which it was designed
The accessory must only be installed and/or used on machines for which
it was designed. For all tyre mounting/demounting procedures not speci-
fically described, refer to the tyre changer use and maintenance manual.
Proceed with bead breaking the tyre as described in the instruction manual
enclosed with the tyre changer.

6.1 PRELIMINARY CHECKS

Check that the device functions correctly before using:
1. Operate the pneumatic control upwards: the arms must move upwards.
2. Operate the pneumatic control downwards: the working arms must move down.
If you notice some anomaly in the operation DO NOT use the tyre changer and
call the technical assistance service immediately.

6.2 DEMOUNTING-MOUNTING - STANDARD TYRES

The bead lifting and bead pressing arms
of the accessory are intended to help
the operator in the tyre demounting and
mounting phases.
6.2.1 Centring function
1) Prepare the clamps of the turntable at
a slightly higher measurement than that of
the wheel, Place the wheel on the turntable;
2) Position the rim clamp arm in the working
position Fig.10;
User's manual
WARNING
WARNING
WARNING
EN
10
17