During Use; Transport, Storage And Handling; Machine Transport Conditions - CEMB SM628BPS Manuel D'utilisation

1.6. DURING USE

In the event you hear any strange noise or feel unusual vibration, if a component or system
is not operating properly, or if there is anything unusual at all, stop using The accessory
immediately.
• Identify the cause and implement all the necessary corrective measures.
• Contact your supervisor if necessary.
Make sure that all other people are standing at least 6 metres (20 feet) from the machine.
To switch off the machine in case of emergency:
• disconnect the power supply plug;
• interrupt the compressed air supply by disconnecting the supply pipe.
2. TRAnSPoRT, SToRAGe AnD
HAnDlInG

Machine transport conditions

The accessory must be transported in its original packing and stowed in the position
shown on the packing itself.
Ambient conditions for machine transport and storage
Temperature: -25° ÷ +55°C.
Do not stack other goods on top of the packing to avoid damaging it.
Handling
To move the packing, insert the tines of a fork-lift
truck into the slots on the base of the packing itself
(pallet).
Keep the packing material intact for possible future transport of the machine.
10
WARNING
WARNING
3
User's manual