Installation Instructions; Information On Physical And Mechanical Characteristics; Application Of D-Bumpers; Correct Positioning - cascade corporation 6881904 Manuel De L'opérateur

!

Installation Instructions

Rubber Layer
Rubber Layer
OK
Information on physical and
mechanical characteristics
3
Magnetic Layer
Fork
Magnetic Layer

Correct Positioning

Rubber Hardness SHORE A
Length of one D-Bumper - in. (mm)
Width of one D-Bumper - in. (mm)
Thickness of one D-Bumper - in. (mm)
Weight of D-Bumper Set (4 pcs.) - lbs. (kg)
Magnetic Field generated by one D-Bumper on contact max. mT
Maximum operating temperature

Application of D-Bumpers

Wear suitable protective gloves and do not wear metal-
based necklaces, bracelets, etc., because they will be
attracted to the magnetic field generated by the magnets
on the bottom side of the D-Bumpers.
The minimum width of forks suitable for D-Bumpers
application is 23.6 in. (60 cm).
Make sure the fork surfaces are clean, dry and free of
foreign objects.
Open the package and separate the devices from one
another.
While positioning the D-Bumpers, keep
fingers free of the space between the fork
surface and the D-Bumper, DUE TO RISK OF
CRUSHING BETWEEN THE SURFACES.
Identify the magnetized side and turn it to the metal
surface, put in position and then join the two surfaces.
After the D-Bumpers have adhered, test the grip and
ensure that the device follows the outline of the fork
precisely without protruding past the edges.
Dispose of all packaging materials as indicated by
current regulations.
OK

Incorrect Positioning

NO
FK0408.eps
60 +/- 2 shore A
27-28 in. (684-712 mm)
2.3 in. (58 mm)
.82 in. (21 mm)
15.4 lbs. (7 kg)
max. mT (19,25)
176° F (80° C)
6881904 EN