Error, Faults & Troubleshooting; Maintenance And Cleaning - Parkside PLEM 50 C2 Instructions D'utilisation Et Consignes De Sécurité

Error, faults & troubleshooting
Error Cause
code
204 Calculation error
220 Low battery
255 Received signal too
weak or measurement
time too long
256 Received signal too
strong
261 Out of measuring
range
500 Hardware error

Maintenance and cleaning

The product is maintenance-free.
CAUTION! Never submerse the product in water or other
liquids. Do not allow any moisture to penetrate into the product
during cleaning.
56 GB/IE
Solution
Refer to user manual, repeat
the procedures.
Replace batteries or charge
the batteries.
Improve the reflective surface.
(Use target plate, white paper)
Improve the reflective surface.
(Use target plate, or don't aim
at strong light)
Measuring the distance within
measurement range.
Switch on / off the product, if
the symbol still appears after
several times, please contact
with your dealer.