Addition (Plus) - Parkside PLEM 50 C2 Instructions D'utilisation Et Consignes De Sécurité

1. Press the Function selection button
"Double Pythagoras" triangle icon of measuring mode indication
symbol
25
2. Now measure the left hypotenuse (largest distance to the left)
and then one leg (shortest distance to the measurement
25 a
surface)
25 b
to the right)
The corresponding line of the "Double Pythagoras" triangle
icon flashes for the individual measurement values. Right after
the third measurement, the calculated length will be shown on
the bottom row
of the "Double Pythagoras" triangle icon stop flashing. The in-
dividual measured values will be shown on the top 3 rows of
the display.
Note: Please note that angular error (no right angles) will lead to
incorrect results. Ensure that the measured distances lie on a plane
(alignment).

Addition (Plus)

1. To add two individual values, take a measurement (length or
area or volume) so that the display is showing a value.
2. Then press the add / subtract button
tion (Plus) function. Now, the plus symbol will be flashing on
the "value-3" row
3. Now take a second measurement (length or area or volume).
The second measured / calculated value will be shown on the
"value-3" row
52 GB/IE
appears on the display.
and finally the right hypotenuse (largest distance
by pressing the MAES button
25 c
of the display and the corresponding line
23
of the display.
22
of the display. Right after the second
22
four times. The
15
(fig. F).
16
to start the Addi-
7