Subtraction (Minus); Historical Memory - Parkside PLEM 50 C2 Instructions D'utilisation Et Consignes De Sécurité

measurement, the added result will be shown on the bottom
row of the display. The first measured / calculated value
23
will be shown on the "value-2" row
Note:
- The addition can be carried out with all units (length, area,
volume). You can also include the measurement results of
functions such as area and volume in the addition.
- Only values of the same units can be added. The first
measured / calculated value sets the unit to be used.
- Addition cannot be used with Pythagoras theorem.
- Result of an addition and the individual values of the addition
are automatically stored in the memory.

Subtraction (Minus)

The subtraction of measurements is carried out in the same way as
the addition. The only difference is that the add / subtract button
has to be pressed again while the plus symbol is flashing
7
on the display to get minus symbol on the display. Rest are same.

Historical memory

All measured and calculated values will be automatically stored in
the memory. The values are saved with their unit (length, area or
volume). Calculated values are stored together with the respective
individual values. There are a total of 100 memory locations avail-
able. As soon as all 100 memory locations are occupied, the oldest
memory record will be over-written by newest record.
of the display.
20
GB/IE 53