Volumes; Simple Pythagoras - Parkside PLEM 50 C2 Instructions D'utilisation Et Consignes De Sécurité

2. Now measure the length and width of the area to be measured
by pressing the MEAS button
the area icon flashes on the display for the individual measure-
ment values. Right after the second measurement, the calculated
area is shown on the bottom row
corresponding line of the area icon stop flashing. Length, width
and perimeter will be shown on the top three rows of the dis-
play orderly.

Volumes

1. Press the Function selection button
icon of measuring mode indication symbol
display.
2. Now measure the length, width and height of the volume to be
measured by pressing the MEAS button
ing line of the volume icon flashes on the display for the indi-
vidual measurement values. Right after the third measurement,
the calculated volume will be shown on the bottom row
the display and the corresponding line of the volume icon stops
flashing on the display. Length, width and height will be shown
on the top three rows of the display orderly.

Simple Pythagoras

Pythagoras Theorem describes the dependence of the lengths of
the sides in a right-angled triangle as follows: a² + b² = c², where
a and b are the legs and c the hypotenuse of the triangle. Using
50 GB/IE
. The corresponding line of
16
of the display and the
23
twice. The volume
15
appears on the
25
. The correspond-
16
of
23