Calling Up A Stored Memory; Clearing / Deleting Memory Record And Single Memory Record - Parkside PLEM 50 C2 Instructions D'utilisation Et Consignes De Sécurité

Calling up a stored memory

Briefly press the memory button to display the latest stored
9
memory. Memory icon will be displayed on the display and
27
the respective memory location number will be shown on the
"memory location number row" to indicate that the product
19 b
has entered the historical memory mode.
Note: The last saved record will always have the memory
location number 01 in the history.
Press the memory button again to go to next memory.
9
Press and hold the memory button for more than
9
1.5 seconds will scroll down the memory record fast by jump-
ing the record from 10 to 20 to 30....100.
Note: The data record "100" will be shown on the display
as "00" (not ("100")).
Clearing / deleting memory record
and single memory record
Under memory mode, press and hold memory button and
9
Clear / return button together for less than 1.5 seconds
8
to Clear currently viewing memory. "CLEAR" will be shown on
the display for a second and a short beep will be heard as a
confirmation.
54 GB/IE