Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Application Service - Bosch PLR 50 C Notice Originale

OBJ_BUCH-2326-003.book Page 43 Thursday, August 20, 2015 8:43 AM
Cause
The display remains unchanged or the measuring tool reacts unexpectedly
when the measuring button or the buttons are pressed
Software error
The measuring tool monitors the correct operation in each measure-
ment. If a defect is detected, the display will show only the adjacent
symbol. In this case, or when the above mentioned corrective meas-
ures cannot correct an error, have the measuring tool checked by an
after-sales service agent for Bosch power tools.

Maintenance and Service

Maintenance and Cleaning

Store and transport the measuring tool only in the supplied protective pouch.
Keep the measuring tool clean at all times.
Do not immerse the measuring tool in water or other fluids.
Wipe off debris using a moist and soft cloth. Do not use any cleaning agents or sol-
vents.
Maintain the reception lens 9 in particular, with the same care as required for eye
glasses or the lens of a camera.
In case of repairs, send in the measuring tool packed in its protective pouch 12.

After-sales Service and Application Service

Our after-sales service responds to your questions concerning maintenance and re-
pair of your product as well as spare parts. Exploded views and information on spare
parts can also be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions concerning our prod-
ucts and their accessories.
In all correspondence and spare parts orders, please always include the 10-digit arti-
cle number given on the nameplate of the product.
Bosch Power Tools
English | 43
Corrective Measure
Remove the batteries/rechargea-
ble batteries, reinsert them and
restart the measuring tool.
1 609 92A 1F3 | (20.8.15)