Parking Brake; Cutting Height Adjustment Lever - Viking MR 4082 Manuel D'utilisation

8.9 Parking brake

The rear wheels of the machine
are blocked by the engaged
parking brake. This prevents the
ride-on mower from being set in motion
inadvertently (e.g. on slopes etc.).
Note
Always check the function of the
brakes before engaging the parking
brake.
Engaging the parking brake
Press the brake pedal (1) down to the stop
with the foot and hold.
Pull the parking brake (2) upwards.
● Release the brake pedal again. The
parking brake is activated if the brake
pedal remains in the pressed position.
● Release the parking brake lever. This
swings downwards.
– The rear wheels are blocked.
84
Releasing the parking brake
Briefly press on brake pedal (1) with the
foot.
● The brake pedal returns to the initial
(unactuated) position.
● The parking brake is deactivated and
the rear wheels are no longer blocked.

8.10 Cutting height adjustment lever

Six cutting levels can be set using the
cutting height adjustment lever.
Unlocking the cutting height
adjustment lever
Risk of injury:
Hold the lever firmly at the handle
before releasing the cutting height
adjustment lever.
For safety reasons, unlock the
cutting height adjustment lever
when the machine is at a standstill.
Pull the cutting height adjustment lever (1)
inwards (towards the driver's seat) and
hold.
● The cutting height adjustment lever is
unlocked, and the cutting height can be
adjusted.
Locking the cutting height adjustment
lever
0478 193 9901 A - EN