Chicco AroundU Mode D'emploi page 24

be permitted through localisation permis-
sions in order for the Chicco BebèCare app
to support the full operation of the system.
WARNING:
• Check to perform each time Chicco Bebè-
Care is used:
• Check that is functioning correctly as de-
scribed in paragraph 7.1 How to activate
Chicco BebèCare point d).
• The smartphone must be turned on and have
a sufficient battery charge for the period of use
when paired with Chicco BebèCare.
• Bluetooth® must be active.
• "Airplane" mode must be deactivated.
• GPS must always be active.
• If two or more smartphones are used that
have the Chicco BebèCare APP installed, it is
necessary to identify which one is effectively
connected to the car seat and therefore must
never be abandoned.
7.1 HOW TO ACTIVATE CHICCO BEBÈCARE
a) Download the Chicco BebèCare APP
The Chicco BebèCare APP must be download-
ed. When accessing for the first time, the APP
will provide all the instructions to follow to
register the account and use Chicco BebèCare.
b) Create the family account
A "family account" must be created with a
single password. This account will be the only
one that can be used by those who use that
specific car seat with Chicco BebèCare.
The password is shared with all users who
interact with the car seat on which Chicco
BebèCare is installed.
IMPORTANT: When creating the family account,
an internet connection must be available (mo-
bile data or WiFi network).
IMPORTANT: If the family password is changed,
the new password must be shared with all the
users who use the same family account.
c) Enter the emergency numbers
The emergency numbers to which the alarm
messages will be sent must be entered upon
initial access (second level - see paragraph 3.2
How Chicco BebèCare functions) containing
the data needed to geolocate the area where
the baby is located.
A minimum of 1 to a maximum of 5 emergency
numbers must be entered.
The emergency numbers must be selected from
the contacts in your smartphone and can be
added, deleted and/or replaced in the future.
IMPORTANT: During this operation, an internet
connection must be available (mobile data or
WiFi network).
IMPORTANT: The emergency numbers must
be mobile phone numbers and not landline
or national emergency numbers.
IMPORTANT: Always check that the emergency
numbers are correct and are functioning after
entering them.
d) Associate the car seat with the family
account
To associate the car seat with Chicco BebèCare
to the family account , proceed with scanning
the QR code on the car seat. The QR code is
printed on the type approval label and can only
be seen after removing the silver film, scratching
it with a coin (Fig. 35). By scanning the QRCode,
the application recognises the car seat model,
then simply turn on Bluetooth®, apply pressure
on the car seat and move the smartphone near
the car seat to be associated and connect the
car seat with the family account.
Up to a maximum of 3 car seats with Chicco
BebèCare can be associated with the same
family account.
The specific car seat can be associated with
ONLY one family account.
IMPORTANT: If the QR code is already visible
or partially visible, contact Customer Service.
IMPORTANT: When scanning the QR code, an
internet connection must be available (mobile
data or WiFi network).
e) Check the correct operation of the
sensors
Periodically perform pressure tests on the car seat
(safety, during the journey on they may harm)
to check that Chicco BebèCare is functioning.
f) Enter the information about the baby
After associating the car seat with the family
24