Chicco AroundU Mode D'emploi page 22

the harnesses in an outward direction (Fig. 19A).
Fit the buckle straps in the relevant slots located
on the sides in the cover (Fig. 19B); this makes
it easier to position your child.
Positioning the child in the child car seat.
WARNING! Always make sure that your child is
seated with his back resting against the back-
rest of the child car seat and with the crotch
strap positioned correctly.
Position the crotch strap correctly, take the
straps and join the two buckle straps. (Fig. 20).
Push them together firmly inside the buckle
until you hear a loud click (Fig. 21). In order
to ensure safety, the two buckle straps are
designed to prevent either from being released
one at a time.
To tension the safety harness of the child car
seat, pull the adjustment strap (E) (Fig. 22) of
the harness, until the harness straps adhere to
the child's body correctly.
WARNING! Do not over-tighten the harnesses
around the child: if you can insert one finger
between the harness and your child's shoul-
ders, it means that they are tightened correctly.
WARNING! Check that the harness is not
twisted.
Turn the child car seat to position it facing
rearward.
This position makes it possible to watch your
child while driving by using the relevant mirror
WARNING: Before use, remove the protective
film covering the mirror surface
WARNING: the REDUCER CUSHION is to be
used from birth to 6 kg - 60 cm.
6. USING THE CAR SEAT FACING FORWARD
(from 16 months to a maximum height
of 105 cm)
WARNING: Forward-facing installation is al-
lowed only from 16 months of age.
To adjust the belt height and
child car seat headrest, see
chapter 7.
Before sitting your child in the child Car seat,
press the harness adjustment button (D) and,
at the same time, hold the two child Car seat
harnesses under the shoulder straps, and pull
them in your direction to slacken them (Fig. 17).
Unfasten the buckle (G) of the child car seat
harnesses by pressing the red button (Fig. 18),
and pull the harnesses in an outward direction
(Fig. 19A).
Fit the buckle straps in the relevant slots
located on the sides in the cover (Fig. 19B);
this makes it easier to position your child.
Positioning the child in the child car seat.
WARNING! Always make sure that your child is
seated with his back resting against the back-
rest of the child car seat and with the crotch
strap positioned correctly.
Position the crotch strap correctly, take the
straps and join the two buckle straps. (Fig. 20).
Push them together firmly inside the buckle
until you hear a loud click (Fig. 21). In order
to ensure safety, the two buckle straps are
designed to prevent either from being released
one at a time.
To tension the safety harness of the child car
seat, pull the adjustment strap (E) (Fig. 22) of
the harness, until the harness straps adhere to
the child's body correctly.
WARNING! Do not over-tighten the harnesses
around the child: if you can insert one finger
between the harness and your child's shoul-
ders, it means that they are tightened correctly.
WARNING! Check that the harness is not
twisted.
WARNING To turn the child car seat facing
forward, use the release lever (Q) and posi-
tion the car seat in forward-facing position
until you hear the CLICK when it is fastened
correctly (Fig. 23).
7. CHICCO BEBÈCARE
Chicco BebèCare was designed and developed
to signal the presence of the baby in the car
seat and to notify the user when accidentally
moving away from the car without the baby,
thanks to the presence of sensors integrated
in the car seat.
Chicco BebèCare was designed and developed
for use only with minors with a total weight
starting from 4 kg.
DISCLAIMER
• The use of this equipment does not replace
in any manner the responsibility and/or
supervision of the vehicle driver (and/or its
22