Display Of Data And Status Messages; Data Display; Status Messages - Fronius String Control 250/25 DCD DF Instructions De Service

Display of Data and Status Messages

Data Display

Current data from the Fronius String Control 250/25 DCD DF are display-
ed in:
PV Systems / [System Name] / Real-time / String Control
Status Mes- Status messages generated by the Fronius String Control 250/25 DCD DF
sages are sent to the datalogger. The datalogger processes this as it would a
status message generated by the inverter. Status messages can be sent
as an SMS, fax or e-mail. For further details please refer to the DATCOM
operating instructions.
The Fronius String Control 250/25 DCD DF service codes are „states" 901
to 905. These service codes indicate an excessive deviation in measuring
channels 1 to 5.
We recommend that you activate the earnings comparison in the „Set-
tings - General" menu. This provides you with a list of service messages
each time data is downloaded from the datalogger to the PC. This list
provides a quick overview of all the messages from the inverter and the
Fronius String Control 250/25 DCD DF.
36