Fronius String Control 250/25 DCD DF Instructions De Service page 58

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Electrical Installa-
tions
ESD Protective
Measures
Safety Precau-
tions in Normal
Operation
Safety markings
Disposal
Data security
Copyright
ud_fr_se_sv_00923
022009
Electrical installations may only be executed in accordance with the relevant
national and regional standards and specifications.
Danger of damage to electronic components due to electrostatic discharge.
Take appropriate protective measures when replacing and installing the
components.
Only operate the machine if all its protective features are fully functional. If
any of the protective features are not fully functional, there is a danger to:
-
the life and well-being of the operator or other persons
-
the equipment and other tangible assets belonging to the owner/operator
-
working efficiently with the equipment.
Have any safety features that are not fully functional repaired by an autho-
rised specialist company before switching the machine on again.
Never bypass or disable safety features.
Equipment with the CE mark fulfils the basic requirements of the Guideline
Governing Low-Voltage and Electromagnetic Compatibility. (More detailed
information about this may be found in the Annex or in the section of your
documentation headed "Technical Data".)
Do not dispose of this device with normal domestic waste!
To comply with the European Directive 2002/96/EC on Waste Electrical and
Electronic Equipment and its implementation as national law, electrical
equipment that has reached the end of its life must be collected separately
and returned to an approved recycling facility Any device that you no longer
require must be returned to our agent, or find out about the approved collec-
tion and recycling facilities in your area.
Ignoring this European Directive may have potentially adverse affects on the
environment and your health!
The user is responsible for backing up data relating to changes made to
factory settings. The manufacturer will not accept liability if personal settings
are deleted.
Copyright to this instruction manual remains the property of the
manufacturer.
The text and illustrations are all technically correct at the time of going to
print. The right to make modifications is reserved. The contents of the
instruction manual shall not provide the basis for any claims whatever on the
part of the purchaser. We should be most grateful for your comments if you
have any suggestions for improvement, or can point out to us any mistakes
which you may have found in the manual.
IV

Publicité

Table des Matières
loading

Table des Matières