Switching Between Display Of Time/Date/Year; Switching Between Temperature, Wind Chill Temperature, Dew Point Temperature, Heat Index - Conrad 51 54 74 Notice D'emploi

f) Switching between Display of Time/Date/Year
• Push the button „SELECT/Zz" (1) several times briefly until the right edge of the display shows an arrow „ " next to
the time display.
• Briefly push the button „MODE/SET" (2) to switch between the displays of:
- Time (hour : minute)
- Date (depending on setting, either month : day or day : month)
- Year
• If no button is pushed, the display switches back to time automatically.
g) Switching between Temperature, Wind Chill Temperature, Dew Point Tempe-
rature, Heat Index
• First select the desired sensor; see chapter 11. d).
• Push the button „SELECT/Zz" (1) several times briefly until the right edge of the display shows an arrow „ " next to
the humidity display.
• Now you can briefly push the button „MODE/SET" (2) to switch between:
„TEMPERATURE"
„WIND CHILL"
„DEW POINT"
„HEAT INDEX"
The wind chill temperature can, of course, only be displayed if channel 1 („CHANNEL 1") is selected in the
display, see chapter 11. d).
Currently measured temperature value
Displays the wind chill temperature: This temperature value is calculated from the interrelati-
on of temperature and wind speed.
For temperatures below +10 °C, higher wind speeds mean that the temperature perceived on
the human skin is lower than the actual temperature (example: Present outdoor temperature
-20 °C, wind chill temperature -34 °C at a wind speed of 40 km/h).
Display of the dew point temperature: The dew point is the temperature to which condensate
just starts to form on an object.
Display of the heat index: This temperature value is calculated from the interrelation of tem-
perature and humidity.
At higher humidity, the human body perceives a temperature as higher than it actually is.
47