Locking; Power Boost; Power Management - Asko HIHM934M Instructions D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

10 min.
Modules (power management)
Operation

4.22 Locking

The lock can be used to lock key operation and cooking
level settings. Only the ON/OFF key can be used to
switch the hob off .
Activating the lock
1. Press the lock key
Lock key will light up.
Switching off the lock
2. Press the lock key
Lock key will light up.
NOTES
An activated lock will remain activated even if the
induction hob is switched off . It must therefore be de-
activated when cooking is re-commenced.
In the event of a power cut the lock will be cancelled,
i.e. deactivated.

4.23 Power boost

The power boost setting makes additional power
available for induction cooking zones. A large quantity of
water can be brought to the boil very quickly.
1. Switch on the induction hob.
2. Press the respective sensor fi eld
far right on MAX of the respective cooking zone. The
power setting display shows
now be activated.
3. After 10 minutes the power boost setting will switch
off automatically. The
will switch down to 9.
NOTE
Press the respective sensor fi eld to prematurely switch
off the power boost setting.

4.24 Power management

For technical reasons two cooking zones always
comprise a module and have a maximum power level.
If this power range is exceeded when a higher power
setting level or the power boost function is switched on
the power management system will reduce the power
setting of the corresponding cooking zone of the module.
The display for this cooking zone will initially blink,
after which the highest-possible power setting will be
consistently displayed.
. The control lamp above the
. The control lamp above the
on the
. The power boost will
will go off and the power level
GB
15

Publicité

Table des Matières
loading

Table des Matières