Gima SUPER TOBI Mode D'emploi page 13

•
Connect the short silicon tube 1, with antibacterial filter 8, to the suction connector 2.
The other tube, with one end connected to the filter must be connected with the other end of jar's lid
connector 3 where has been fixed the red float (security float).
When the 90% of the volume of the jar is reached there is the activation of the security float (the float
close the aspiration connector on the jar) to avoid liquid penetration inside the device.
The device must be used on a plan of horizontal operation.
•
Connect the long silicon tube 4 to the other jar's lid connector 5.
•
Connect the other end of the long silicon tube 1 to the probe plastic connector then connect the suction
probe 6 to it.
•
Unscrew the jar's lid and fill the jar 1/3 full or ordinary water (this for an easy cleaning operations and an
rapid reaching of the functionality vacuum) then rescrew the lid on the jar correctly.
•
Connect the power cord to the device then connect the plug to the electrical mains supply.
•
Push switch 7 on position I to start suction
•
Once finished push switch on O position and unplug.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE
At the end of its working life, the product must not be disposed of as urban waste.
It must be taken a special local authority differentiated waste collection or to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative consequences for the environment
and health deriving from inappropriate disposal and enables the constituent materials to be recovered to
obtain significant saving in energy and resources. As a reminder of the need to dispose of separately the
product is marked with a crossed-out wheeled dustbin.
INSTRUCTIONS
WITH EC DIRECTIVE 2002/96/EC:
13