Button Function - Beyerdynamic MCS 50 Notice D'utilisation

6.4 MCS 50 - Creation of a new Configuration
Speech time
You can enter the speech time of the delegate microphone units (hr.hr.-min.min.-sec.sec.). Refer also to chapter "5.2 Configuration 4. Parameter".
Warning time
You can adjust the warning time of the illuminated ring in the microphone unit. Refer also to the chapter "5.2 Configuration 5. Parameter".
42
• Start the installed MCS-Editor Software via the "Programs" start menu.
• Choose the "File" menu and click the "New" command.
• Enter the desired configuration into the MCS-Editor mask.
Number of Stations
Enter the number of microphone units being used.

Button function

You can choose between PTT and ON/OFF function of the microphone button of all microphone units
(chairman and delegates). (Refer also to chapter "5.2 Configuration 3. Parameter".)
Operation
You can choose between:
Request-to-talk
Autonomy
Override
(Automatic has no function)
Max. Chairman
Enter the number of chairman microphone units.
Chairman mode
You can adjust the priority button of the chairman microphone unit and choose between "Mute" and "Clear"
(refer also to chapter "5.2 Configuration 7. Parameter"). In the "Normal" mode the delegate microphone units
are switched off and the chairman microphone unit is switched on, when the priority button is pressed. After this
more delegates can switch on their microphone units.
NOM
You can adjust the max. number of switchable delegate microphone units (NOM).
Refer also to chapter "5.2 Configuration 6. Parameter".