Setting Up; Configuration - Beyerdynamic MCS 50 Notice D'utilisation

5.

Setting up

5.1 Switching on
beyerdynamic
MCS 50 V.1 - Software Version (E)
Reset N.o.m.
System check please wait
Reset N.o.m.
System O.K.
Reset N.o.m.
Level
Override NOM 0
Reset N.o.m.
Wrong number of
microphone units
Reset N.o.m.

5.2 Configuration

You access the configuration menu when you press both buttons simultaneously of the switched on MCS 50. The arrows in the display indicate
which buttons of the device have to be pressed, left (Reset) = M, right (N.o.m.) = L. To exit the individual menu items press both buttons simultaneously.
You will access the main menu again or return to the operation mode. The entered data is stored automatically.
1. Parameter
Number of mics
More
Reset N.o.m.
20
- +
Reset N.o.m.
36
When the system is switched on it carries out a system check checking all stored parameters. An error
message appears at a deviation.
System O.K. = the conference system is ready for operation
After the system check the default screen appears indicating the adjusted mode (Autonomy, Override,
Request-to-talk, Automatic), the signal level of the connected devices/microphone units and the actual
number of switched on microphones, including chairman microphone units.
If this error message occurs, carry out a configuration (refer to chapter 5.2 "Configuration" or adjust the user
specific parameters and configurate the corresponding parameters (refer to chapter "5.3 Adjusting the user
specific parameters").
In this menu the number of connected microphones can be adjusted. Press the left button (4) to enter the
sub-menu.
Press the left button (4) or right button (5) to enter the number. It is possible to enter 32 microphone units at
maximum. (As an option up to 64 microphone units.)