Once The Program Has Finished; How To Get The Best Drying Results; Unloading The Dishwasher - Pelgrim GVW321XL Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Once the program has finished

The end of the program is indicated by one short signal from the buzzer. The chapter Settings describes
how to change this function.
Moreover, the end of the program is indicated by the status light turning off. See Status light in the
chapter Using the dishwasher.
The dishwasher switches off automatically after the program ends. Shut off the water tap after each
use.

How to get the best drying results

Fully load the dishwasher.
Angle dishes with hollows, such as cups, so that the rinse water will run off. This is also important
for plastic items.
Top up with rinse aid or increase the rinse aid dosage level.
Activate the Auto open option.
Allow the dishes to cool before unloading the dishwasher.

Unloading the dishwasher

Hot porcelain is more fragile. Leave the dishes to cool in the dishwasher before unloading them.
Unload the lower basket first to avoid any water drops from the upper basket falling onto the dishes
in the lower basket.
17

Publicité

Table des Matières
loading

Table des Matières