Outdoor Unit Installation; Installation Site Choosing; Outdoor Unit Mounting Dimension - Airwell CDM Série Manuel D'installation

3. OUTDOOR UNIT INSTALLATION

3.1 INSTALLATION SITE CHOOSING

OUTDOOR UNIT
■ Where it is out of rain or direct sunlight.
■ Where it is well-ventilated and free from obstacles near the air inlet and air outlet.
■ Where does not increase the operating noise or vibration of the outdoor unit.
■ Where does not cause any drainage problem with discharged water.
■ Install the outdoor unit properly at a place that is durable enough to the weight of the outdoor unit.
■ Where provides appropriate clearances as outlined
■ Where the piping between the indoor and outdoor units is within the allowable limits.
■ In regions with snowfall and cold temperatures, avoid installing the outdoor unit in areas where it can be
covered by snow. If heavy snow is expected, a field supplied ice or stand and field supplied-installed wind
baffle should be installed to protect the unit from snow accumulation and blocked air intake.
■ When installing the outdoor unit in a place that is
constantly exposed to a strong wind, it is recommended
that a wind baffle be used.

3.2 OUTDOOR UNIT MOUNTING DIMENSION

Outline dimension
Model
YDFA
W H
012
800 554 333
800 554 333
018
D A
B
340 514
340 514
GB-10