Babyauto Winy Savile V3 Notice D'instruction page 25

2. SEAT PARTS AND FITTINGS
A. Group 2 vertical belt hook.
B. Ergo seat cushion.
C. Harness pads.
D. Harness straps.
E. Group 2 diagonal belt hook.
F. Locking buckle.
G. Buckle release-button.
H. Locking buckle pad.
I. Group 0 diagonal belt hook.
J. Harness adjustment button.
K. Harness adjuster strap.
L. Child seat adjuster.
M.Group 0 vertical belt hook.
N. Group 2 diagonal belt hook.
O.Harness straps pad connector.
P. Harness strap slot.
Q. Height regulator (15-36 Kg.).
R. Childs´s seat base Group 0.
S.Metal harness connector.
T.Group 1 Locking clip.
3. INSTALLING CHILD SEAT. GROUP 0+.
WARNING
Do not use the child seat on a passenger seat fitted with an active
airbag.
Always check that the harness straps are suitable for the height of
your child. The shoulders of the child should always be just below the
back slots at a suitable height
1. From the base of the car seat, please change the
the base to the front position by turning it on its axis (3.1).
2. Recline the seat as posible. To adjust the reclining position of the
child seat, pull the handle
position (3.2).
Group 0+/1/2
Only suitable for group 0+, approx.
0 to 15 months (0-13 Kg.)
L forward until you reach the required
R controller from
www.babyauto.com 25