Drive Select Lever Operation And Reverse Driving - Yamaha Motor RAPTOR 350 YFM350RV Manuel Du Propriétaire

1. Drive select lever
2. Knob
3. For forward drive
4. For reverse drive
1. Levier de présélection
2. Bouton
3. Conduite en marche avant
4. Conduite en marche arrière
1. Palanca de selección de gama
2. Botón
3. Para marcha adelante
4. Para marcha atrás
Drive select lever operation and reverse driv-
ing
CAUTION:
_
Before shifting, stop the machine and return
the throttle lever to its closed position, other-
wise the transmission may be damaged.
_
NOTE:
_
When shifting into reverse, the clutch must be dis-
engaged.
_
1. Bring the machine to a complete stop and re-
turn the throttle lever to the closed position.
2. Pull in the clutch lever to disengage the
clutch.
3. Apply the brake pedal.
4. While pulling the knob, move the drive select
lever toward the rear until it completely stops.
NOTE:
_
When in reverse, the reverse indicator light should
be on. If the light does not come on, ask a Yamaha
dealer to inspect the machine.
_
6-11
EBU01171