Left Arm Installation - Cassese CS 940 Manuel D'utilisation

USER & PARTS MANUAL
Unlock of 3 turns the 2
front horizontal
screws.
Unlock the 3 screws
(ULF) on the top of the
table.
Start to install the left
arm (7) taking care of
not damaging the
scale.
Still with the help of
the second person,
put back both screws
(V4) and (V5) under
the arm.
4.B.b

Left arm installation

Figure 4-28
Figure 4-30
Figure 4-32
Figure 4-34
Remove the 2 screws
(V4) and (V5), discard
the nut which was just
installed to avoid
damaging in transport
the scale with a too
long screw.
Remove the screw
(V6) in front of the
machine, keep that
screw, nut and washer
as they will have to be
installed in exact
same position.
With the help of a
second person, install
back the screw (V6)
but do not block the
screw.
Slide in the 3 screws
(ULF) and in the 2
front screws the left
arm profile.
CS940
Figure 4-29
V6
Figure 4-31
Figure 4-33
Figure 4-35
20