Cassese CS 940 Manuel D'utilisation page 19

USER & PARTS MANUAL
Make sure the scales
are well aligned.
Lock the 2 screws
under the arm.
Lock the screw (V1) of
the right arm.
Remove the adhesive
protection of the arm
scale and stick it on
the table of the
machine.
Still with the help of
the second
holding the
levelled, lock the 3
screws under the arm.
Figure 4-22
With a bubble level on
the arm, hold it in
correct position while
a second person is
locking the front screw
(see following image).
Figure 4-23
Install
washer and the nut of
the screw (V1). Lock
the nut while holding
the screw
Allen key.
Figure 4-25
Figure 4-27
person
arm
back the
with an
CS940
Figure 4-21
Figure 4-24
Figure 4-26
19