Radio Connector; Final Warnings; Disposal - Key Automation 900CT-201 Manuel D'emploi

ADJUSTMENT OF MOTOR FORCE
After a breakaway of 1.5 seconds, the electronic force control activates which distributes the power supply,
adjusting the value by means of parameter L.
N.B. for maximum thrust loads refer to current standards.

RADIO CONNECTOR

The CT-201 unit is compatible with the following Keyautomation receivers of the MEMO snap-in series:
900RXI-41 / 900RXI-41R / 900RXI-42 / 900RXI-42R

FINAL WARNINGS

•
The installation of the automation must be performed properly by qualified personnel in possession of
legal requirements and in compliance with machine directive 98/37/CE and standards EN13241-1, EN
12453 and EN 12445.
•
Check the solidity of existing structures (columns, hinges, doors) in relation to the force generated by
the motor.
•
Check that there are suitably sturdy mechanical stops at the end of opening and closing travel of the
doors.
•
Analyze the risks of the automation and adopt necessary safety measures and warnings.
•
install controls (such as the key selector) so that the user is not in a hazardous position.
•
Upon completion of installation, check the safety devices several times, as well as those for signalling
and automation release.
•
Provide the automation with the EC label or tag that contains the danger information and identification
data.
•
Give the final user the instructions for use, safety warnings and the EC declaration of conformity.
•
Make sure the user understands proper automatic, manual and emergency operation of the
automation.
•
Inform the user in writing (for example in the instructions for use) of any unprotected residual risks and
foreseeable improper use.
•
Provide a maintenance schedule for the system (at least every 6 months for the safeties) with an
appropriate register of work performed.
•
Keep this instruction manual for future reference.
•
KEY Automation Srl reserves the right to make, at any time, any modifications which may be required
to improve appearance and/or operation.

DISPOSAL

This product is composed of various components which may in turn contain pollutants. Do not dispose of it in
the environment! Find out about the method for recycling or disposing of the product in compliance with
current local laws.
18