Equipment Identification; Requesting Technical Assistance; Manufacturer's Liability - BONFIGLIOLI Tecnoingranaggi TR 053 Manuel D'installation Et D'entretien

1.2 EQUIPMENT IDENTIFICATION

The gear unit bears the following nameplate. The nameplate bears all references and indispensable
safety instructions. The gear unit's identifying code is explained in the Sales Catalogue.
If the gear unit is supplied complete with electric motor (gearmotor), all information regarding the motor
itself is supplied in the motor manual.
Nameplate data:
Readability of the nameplate
The nameplate and the information thereon must be readable at all times and consequently cleaned
from time to time.
Should the nameplate wear and/or become damaged so as to affect its readability or that of even one
of the items of information thereon, the User must request a new nameplate from the Manufacturer,
quoting the information given in this manual, and replace the old one.

1.3 REQUESTING TECHNICAL ASSISTANCE

For any technical service needs, contact the Manufacturer's sales network, quoting the information on
the unit's nameplate, the approximate hours of service and the type of defect.

1.4 MANUFACTURER'S LIABILITY

The Manufacturer declines all liability for cases of:
use of the gear unit in violation of local laws on safety and accident prevention at work.
incorrect installation, disregard or incorrect application of the instructions provided in this
manual.
modifications or tampering.
work done on the unit by unqualified or unsuitable persons.
use of non original spare parts
faulty installation of the motor
use of the gearbox beyond the admissible conditions, and particularly: with torque and speed
exceeding the ratings listed in the sales catalogue.
Gear unit type.
Month / Year of manufacture.
Serial number.
Gear ratio.
Angular backlash.
Oil type.
15