Electrical Installation; Before Use; Safety Instructions - JB Systems Light LP-3315 RGB Mode D'emploi

Masquer les pouces

Table Des Matières

Table des Matières

ENGLISH

Thank you for buying this JB Systems

product. To take full advantage of all possibilities and for your own safety, please

read these operating instructions very carefully before you start using this unit.

FEATURES

This unit is radio-interference suppressed. This product meets the requirements of the current European and national

guidelines. Conformity has been established and the relevant statements and documents have been deposited by the

manufacturer.

 This device has been designed to produce decorative effect lighting and is used in light show systems.

 RGB projector, based on 33 high power LEDs (11x Red, 11x Green, 11x Blue)

 Perfect for all kinds of architectural applications in houses, pubs, stores, discotheques, ...

 Very low power consumption, only 5 Watt

 Beam angle: 15°

 Can be used in any MR16 armature (same size as standard halogen MR16 lamps)

 Can be used in standard PAR16 projectors

 To be used with a special LED MANAGER power supply! (4wire 24Vac connection)

BEFORE USE

 Before you start using this unit, please check if there's no transportation damage. Should there be any, do not use the

device and consult your dealer first.

 Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary for the user to

strictly follow the safety instructions and warnings in this user manual. Any damage caused by mishandling is not

subject to warranty. The dealer will not accept responsibility for any resulting defects or problems caused by

disregarding this user manual.

 Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user manual.

Check the contents:

Check that the carton contains the following items:

 Operating instructions

 LP3315 unit

SAFETY INSTRUCTIONS:

CAUTION: To reduce the risk of electric shock, do not remove the top cover. No user-

CAUTION

serviceable parts inside. Refer servicing to qualified service personnel only.

The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use or the

presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude

to constitute a risk of electric shock.

The exclamation point within the equilateral triangle is intended to alert the user to the presence of important

operation and maintenance (servicing) instructions in the literature accompanying this appliance.

This symbol means: indoor use only.

This symbol means: Read instructions.

 To protect the environment, please try to recycle the packing material as much as possible.

 To prevent fire or shock hazard, do not expose this appliance to rain or moisture.

 To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when bringing it

into a warm room after transport. Condense sometimes prevents the unit from working at full performance or may even

cause damages.

 This unit is for indoor use only.

 Don't place metal objects or spill liquid inside the unit. Electric shock or malfunction may result. If a foreign object

enters the unit, immediately disconnect the mains power.

 Don't cover any ventilation openings as this may result in overheating.

 Prevent use in dusty environments and clean the unit regularly.

 Keep the unit away from children.

 Inexperienced persons should not operate this device.

JB SYSTEMS

OPERATION MANUAL

1/13

LP3315 RGB LED PROJECTOR 15°

ENGLISH

 Maximum save ambient temperature is 40°C. Don't use this unit at higher ambient temperatures.

 Make sure the area below the installation place is free from unwanted persons during installation and servicing.

 The electrical installation should be carried out by qualified personal only, according to the regulations for electrical

and mechanical safety in your country.

 In the event of serious operating problems, stop using the fixture and contact your dealer immediately.

 The housing and the lenses must be replaced if they are visibly damaged.

 Due to safety reasons it is prohibited to make unauthorized modifications to the unit.

Important: Never look directly into the light source! Don't use the effect in the presence of persons suffering from

epilepsy.