Transportation And Storage; Transport Inspection; Transport And Storage Conditions; Installation And Electrical Connection - Wilo Para Série Notice De Montage Et De Mise En Service

Scope of delivery
Accessories
Transport
inspection
Transport and
storage conditions
38

5 Transportation and storage

• High-efficiency circulator
• Installation and operating instructions
Accessories must be ordered separately. For a detailed
list and description, consult the catalogue.
The following accessories are available:
• Mains connection cable
• iPWM/LIN signal cable
• Thermal insulation shell
• Cooling shell
Immediately check for transportation damage and com-
pleteness upon delivery, and lodge any complaints
immediately.
Protect against moisture, frost and mechanical loads.
Permissible temperature range: -40 °C to +85 °C
(for max. 3 months)

6 Installation and electrical connection

6.1 Installation
May only be installed by qualified technicians.
WARNING!
Risk of burns from hot surfaces!
Pump housing (1) and glandless motor (2) may become
hot and cause burns if touched.
• During operation, only touch the control module (5).
• Allow the pump to cool down before commencing
any work.
Wilo SE 02/2020