Installing/ Removing The Battery Pack - Kenwood TK-D240 Guide De L'utilisateur

INSTALLING/ REMOVING THE BATTERY PACK

The battery pack is not charged at the factory; charge it before
use.
CAUTION
◆ Do not short the battery terminals or dispose of the battery by fi re.
◆ Never attempt to remove the casing from the battery pack.
1 Align the battery pack with the
back of the transceiver, then
press the battery pack and
transceiver fi rmly together until
the release latch on the base
of the transceiver locks.
2 To remove the battery pack, lift
the safety catch on the base of
the transceiver, then press the
release latch underneath the
safety catch.
3 While pressing the release
latch, pull the battery pack
away from the transceiver.
11