Bestron DF402B Mode D'emploi page 30

OPERATION - General
The fryer is only intended for domestic use, not for professional use.
1. Housing
2. Heat resistant handles
3. Lid
4. Viewing window
5. Anti-odor filter
6. Frying basket
7. Combined on/off and
temperature control dial
8. On/off pilot light
9. Temperature pilot light
10. Inner pan
11. Heating element
12. Power cord and plug
OPERATION - Using for the first time
1. Remove the appliance from the packaging.
2. Clean the appliance thoroughly to remove any manufacturing residues (see "Cleaning and maintenance").
ATTENTION: Never using solid fats (blocks)
ATTENTION: Only use oil or liquid fats specifically suitable for frying
OPERATION - Overheating safeguard
You can use the deep fryer only when it is filled with oil or liquid fat. Do not use the appliance if the bowl
is empty or does not contain sufficient oil or liquid fat. The deep fryer is equipped with an overheating
safeguard. This will be activated if the temperature is rising, for example, you use the appliance without
(sufficient) oil or liquid fat. Should this happen, you have to rest the deep fryer.
1. Switch off the deep fryer by turning the On/Off -
temperature control knob completely to the left.
Disconnect the plug from the wall socket.
2. Allow the appliance to cool down completely.
3. Reset the appliance by pressing with a small
screwdriver against the reset button in the hole
at the backside of the panel (see figure 2).
OPERATION - Placement of the handle
Attention! For safe use of the fryer, it is extremely important that the handle is placed correctly.
1. Squeeze the metal ends of the handle together and place them in the circular openings of the basket,
see figure 3A.
2. Make sure the metal ends of the handle are positioned behind the metal clips, see figure 3B.
3. After releasing the metal ends the handle will be locked see figure 3C.
9.
8.
3.
7.
12.
10.
11.
1.
2.
30
User's instructions
5.
4.
6.
2.