Britax SKYLINE Guide De L'utilisateur page 22

Britax Child Safety, Inc.
4� Attach the lower connectors�
a� Verify the lower anchor adjuster straps are not twisted�
b� Using the lower anchor farthest from you for easiest
positioning push the lower connectors onto their adjacent
lower anchors as shown�
NOTE: You may need to turn the back of the booster seat
towards you for easier access to the lower anchors.
c� A click helps confirm lower connectors are attached� Pull on
lower connectors to confirm a secure attachment�
IMPORTANT: If a click is not heard when connecting the lower
connectors, the lower anchor adjuster strap may be twisted or there
may be debris in the lower connector� Correct either situation before
continuing with the positioning process�
5� Guide the booster seat into place while pulling the lower
connector adjuster strap on either side of the booster seat to
remove slack�
NOTE: Only tighten until the slack is removed from the lower
connector adjuster strap. Over-tightening the strap can force the
backrest of the booster seat forward�
20