Britax SKYLINE Guide De L'utilisateur page 21

Lower connectors are not required for proper seat installation� If lower connectors are not used,
ensure they are properly stored in the seat base and do not interfere with the base of the booster
seat�
1� Verify the booster seat is compatible with your vehicle� Refer to
pages 27-28 for information about compatible seat belts
and head restraints�
a� Push the booster seat back against the vehicle seat back
and ensure that it is positioned correctly so the vehicle head
restraint allows the backrest to lie flat against the vehicle
seat back� Vehicle head restraint may need to be adjusted or
removed� For more information, see page 28�
b� Ensure that the base of the booster seat does not hang over
the edge of the vehicle seat�
2� If the vehicle seat back is adjustable, ensure it is in the upright
position before placing the booster seat on the vehicle seat
(see page 12)�
3� Push the lower connector release button and pull lower
connector to fully extend the lower connector adjuster strap�
Repeat on the opposite side to ensure that all slack has been
released from the lower connector system�
SKYLINE User Guide
19