Assistance And Repairs; Warranty Coverage; Maintenance Table - Miogarden Premium ARM 4680 Li Manuel D'utilisation

11. ASSISTANCE AND REPAIRS

This manual provides all the necessary information
to run the machine and for correct basic maintenance
operations which can be performed by the user. Any
regulations and maintenance operations not described
herein must be carried out by your Dealer or Authorised
Service Centre, which have the necessary knowledge
and equipment to ensure that the work is carried out
correctly, maintaining the correct degree of safety and
the original operating conditions of the machine.
Any operations performed in unauthorised centres or by
unqualiied persons will totally invalidate the Warranty and
all obligations and responsibilities of the Manufacturer.
• Only authorised service workshops can carry
out guaranteed repairs and maintenance.
• The authorised service workshops only use genuine
spare parts. Genuine spare parts and attachments
have been designed speciically for machines.
• Non-original parts and attachments are not approved;
use of non-original spare parts and attachments will
jeopardise the safety of the machine and relieve the
Manufacturer from all obligations or liabilities.
• It is advisable to send your machine once a year
to an authorised service workshop for servicing,
assistance and safety device inspection.

13. MAINTENANCE TABLE

MACHINE
Complete bolt and screw check
Safety checks/check controls
Check the rear discharge / side discharge guards.
Check the grass-catcher, side discharge chute
Check the cutting means
Check the battery charge status
Recharge the battery
General cleaning and inspection
Checking for any damage to the machine. If necessary,
contact the authorised assistance centre.
Cleaning the air ilter
Replacing the cutting means
Adjusting the drive engagement cable
* Refer to the battery/battery charger manual.
** The operation must be carried out by your Dealer or a specialised Service Centre
*** At the irst signs of any malfunction, contact your Dealer immediately
Operation

12. WARRANTY COVERAGE

The warranty covers all material and manufacturing
defects. The user must follow all the instructions
provided in the accompanying documentation.
The warranty does not cover damages caused by:
• Failure to become familiar with the documentation
accompanying the machine
• Carelessness
• Incorrect or prohibited use or assembly
• Use of non-genuine spare parts
• Use of attachments not supplied or
approved by the manufacturer
The warranty does not cover:
• Normal wear and tear of consumables, such
as wheels, blades, safety bolts and wires
• Normal wear and tear
The purchaser is protected by his or her own
national legislation. The purchaser's rights under
the national laws or his or her own country are
not in any way restricted by this warranty.
Frequency
Before each use
Before each use
Before each use
Before each use
Before each use
After each use
After each use
After each use
Once a month
-
***
EN - 11
Notes
par. 7.4
par. 6.2
par. 6.2.1
par. 6.2.1
*
par. 7.2.3
*
par. 7.3
-
par. 8.1
par. 8.2
**
par. 8.3