Battery / Battery Charger; Environmental Protection; Description Of The Machine And Planned Use; Intended Use - Miogarden Premium ARM 4680 Li Manuel D'utilisation

The noise and vibration levels shown in these
instructions are the maximum levels for use of the
machine. The use of an unbalanced cutting element,
the excessive speed of movement, or the absence
of maintenance have a signiicant inluence on
noise emissions and vibrations. Consequently, it
is necessary to take preventive steps to eliminate
possible damage due to high levels of noise and stress
from vibration. Maintain the machine well, wear ear
protection devices, and take breaks while working.
Storage
• To reduce ire risks, do not leave containers
with debris inside a room.
2.5

BATTERY / BATTERY CHARGER

IMPORTANT The following safety instructions
are in addition to the safety requirements
provided in the speciic battery and battery
charger manual delivered with this machine.
• Only use battery chargers recommended by the
manufacturer to recharge batteries. An inadequate
battery charger may cause electric shock, overheating
or corrosive liquid to leak from the battery
• Use only batteries speciically designed for
your power tool. The use of other batteries
may cause injuries and ire risks.
• Make sure that the machine is switched of before
inserting the battery. Inserting a battery in a
machine which is switched on can cause a ire.
• Keep all unused batteries at a distance from
paper clips, coins, keys, nails, screws or other
small metal objects as contact with the same
can cause short circuits. Short circuits between
battery contacts can lead to explosion or ires.
• Never use the battery charger in environments in
the presence of vapours, lammable substances
or on easily lammable surfaces such as
paper, fabric, etc. The battery charger heats
up during recharging and may cause a ire.
• When transporting batteries, make sure that the
contacts never come into contact with each other
and never use metal containers to transport them.
2.6

ENVIRONMENTAL PROTECTION

Safeguarding the environment must be a relevant
and priority aspect of machine use, of beneit to
the community and the environment we live in.
• Avoid being a disturbance to the neighbourhood.
Use this machine at reasonable times of the
day only (not early morning or late evening
when the noise could cause disturbance).
• Scrupulously comply with local regulations for the
disposal of packaging, deteriorated parts or any
elements with a strong environmental impact; this
waste must not be disposed of as normal waste,
it must be separated and taken to speciied waste
disposal centres where the material will be recycled.
• Scrupulously comply with local regulations
for the disposal of waste materials
• When the machine is withdrawn from service,
do not dispose of it in the environment, but take
it to a waste disposal facility in accordance
with the local regulations in force.
Do not throw electrical equipment away with
domestic waste. According to the European
Directive 2012/19/EU on electrical and electronic
equipment waste and its implementation in
compliance with national standards, old
electrical equipment must be collected separately, for eco-
compatible recycling. If electrical equipment is disposed of
in a landill or in the ground, the harmful substances can
reach the water table and enter the food chain, damaging
your health and wellbeing. For further information on
disposing of this product, contact the competent authority
for the disposal of domestic waste or your dealer.
At the end of their working life, dispose of
batteries paying due attention to the
environment. Batteries contain material
classiied as hazardous for you and the
environment. They must be removed and
disposed of separately at a facility that accepts
lithium-ion batteries.
Separate waste collection of the products and
packaging used allows the materials to be
recycled and reused. Reuse of recycled
materials help to prevent environmental pollution
and reduces the demand for raw materials.
3. GETTING TO KNOW THE MACHINE
3.1
DESCRIPTION OF THE MACHINE
AND PLANNED USE
This machine is a pedestrian controlled lawnmower.
The machine is essentially composed of a motor
which drives a cutting means enclosed in a
casing, equipped with wheels and a handle.
The operator is able to operate the machine and use
the main controls, always staying behind the handle
at a safe distance from the rotating cutting means.
If the operator leaves the machine, the motor and
cutting means will stop within a few seconds.
3.1.1

Intended use

This machine was designed and manufactured
for cutting (and collecting) grass in gardens and
grassy areas, in proportion to its cutting capacity,
carried out by a pedestrian operator.
Generally speaking this machine can:
1.
mow the grass and collect it in the grass catcher;
2.
mow the grass and discharge it on the
ground from the rear section;
3.
mow the grass and discharge it
from the side (if provided)
4.
mow, chop and deposit the grass on the
ground (mulching efect - if provided ).
EN - 3